My HEETS Device Is Not Producing Enough Vapor – What Should I Do - FrogsGoneFishin
IQOS

My HEETS Device Is Not Producing Enough Vapor – What Should I Do?

 

Your device is not producing good vapor. Well, it all depends upon how you are storing the HEETS. Before knowing what steps should be taken, it’s important to know if a device is not generating as much steam as they should, it is important to know that HEETS come under guarantee.
All grievances received are treated well by the creator Philip Morris. If such a thing happens then you can return the device from where you bought it or contact your dealer. Value of HEETS is the essence and utmost importance. Here is a guide of tips so that the quality is enhanced and improvised after you buy heets online.

Polished Blade

Foremost factor is to maintain and keep the heating blade and the holder polished right after every use. The Heets sticks should be implanted when the blade is hot enough. It should pass through the tobacco smoothly. Warming devices and adding the HEETS will help the hot blade through which the tobacco can create a right air channel.

My HEETS Device Is Not Producing Enough Vapor – What Should I Do

Press the Stick

The tobacco part can be rubbed a little with the fingers. While doing this, one should be careful so that it doesn’t break. The size of the tobacco part is approximately half an inch and the rest of it the filter. Squeezing the tobacco part of the HEET will also help in grinding the tobacco inside which will result in helping the edge go in easier.

Blowing Method

The cartridge should be blown in from where tobacco is. Heets unit can be pulled out, turned at 90 degrees, insert it again and this should help perform better. This all should be carried while smoking. After pulling the unit in and out, it will rub tobacco creating an airflow channel.

My HEETS Device Is Not Producing Enough Vapor – What Should I Do Keep it Clean

Hot and Cold Compress

Few people who use HEETS say that the finest way is too chill HEETS. They are warmed up in the device, hence cold-water compresses in and causes them to hydrate once they are taken out of the chiller. Pasting the unit can also be helpful. Not much but a little. After that quality can be a little better.

Keep it Clean

Chances are high that the steam could get piping hot, overdoing it should be avoided. Most of the smokers recommend keeping the machine clean. Some users also suggest waiting for the light to blink a few times after turning the holder on, and only then insert the heet stick. Gently roll its sides from using it. These are some suggestions and advice from some of the users. It may differ from person to person how to handle it and there can be other ways to improvise. Some people do not face any problems. Buying the HEETS online will also be helpful as they provide good quality products, and your grievances will be addressed with much care and efforts.

 

 

My HEETS Device Is Not Producing Enough Vapor – What Should I Do - FrogsGoneFishin
Share via
Copy link
Powered by Social Snap